We look forward to providing you with professional services - Zhongda Leader
-
-
-
RV Cycloidal Pin Wheel Reducer
PRODUCTS
Detail
■ 60W □ 90mm
■ Specs / Motor
● This type of motor does not contain a built-in simple brake mechanism.
Model · Type
Lead Wire Type
Rating
Output power
W
Voltage
V
Frequency
Hz
Current
A
Starting Torque
mN.m
Rated Torque
mN.m
Rated Speed
r/min
Capacitor
μF
Pinion Shaft
Round Shaft
5RK60GN-AFM
5RK60A-AFM
30min
60
1ph 100
50
1.26
470
470
1250
25.0
60
1.70
380
1550
5RK60GN-EFM
5RK60A-EFM
30min
60
1ph 110
60
1.05
330
380
1550
15.0
1ph 120
380
5RK60GN-CFM
5RK60A-CFM
30min
60
1ph 220
50
0.55
420
470
1250
4.5
1ph 230
0.60
460
5RK60GN-HFM
5RK60A-HFM
30min
60
1ph 220
60
0.55
420
380
1550
4.5
1ph 230
0.60
460
5RK60GN-SFM
5RK60A-SFM
30min
60
3ph 220
50
0.45
1000
470
1250
-
60
0.40
800
380
1550
5RK60GN-S3FM
5RK60A-S3FM
30min
60
3ph 380
50
0.26
1000
470
1250
-
60
0.23
800
380
1550
● When the motor is approved under various safety standards, the model name on the nameplate is the approved model name.
●
： Contains a built-in thermal protector(automatic return). If a motor overheats for any reason, the thermal protector is opened and the motor stops.
● When the motor temperature drops, the thermal protector closes and the motor restarts. Be sure to turn the motor off before inspecting.
● Note: "-A" it means the voltage 110V, the assembly capacitor vaule it is according the labe.■ Type
● Motor
Type
Model
Pinion Shaft
Round Shaft
Lead
Wire
Type
5RK60GN-AFM
5RK60A-AFM
5RK60GN-EFM
5RK60A-EFM
5RK60GN-CFM
5RK60A-CFM
5RK60GN-HFM
5RK60A-HFM
5RK60GN-SFM
5RK60A-SFM
5RK60GN-S3FM
5RK60A-S3FM
● Parallel Shaft Gearhead (Sold Separately)
● Enter the gear ratio in the box (□) within the model nameGearhead Type
Gearhead Model
Gear Ratio
Long Life ● Low
Noise
5GN□K
3、3.6、5、6、7.5、9、10、 12.5、15、18、20、25、30、 36、40、50、60、75、90、 100、120、150、180、200
5GN10XK（ Decimal Gearhead ）
■ Gear Motor-Torque Table
● Gearhead and mid-gearbox can be sold separately.
● Enter the gear ratio in the box (□) within the model name.
● The colored background
indicates the same rotating direction of the motor while the rotating direction of others are opposite.
● The speed is calculated by dividing the motor's synchronous speed (50Hz：1500r/min、60Hz：1800r/min) by the gear ratio. The actual speed is 2%~20% less than the displayed
value, depending on the size of the load.
● To reduce the speed beyond the gear ratio in the table, attach a decimal gearhead (gear ratio:10) between the gearhead and motor. In that case, the permissible torque is 6N·m.■ Allowance Torque Unit： Upside（N.m）/ Belowside（kgf.cm）
Type
Motor/Gearhead
Gear Ratio
3
3.6
5
6
7.5
9
10
12.5
15
18
20
25
30
36
40
50
60
75
90
100
120
150
180
200
Speed r/min
50Hz
500
417
300
250
200
166
150
120
100
83
75
60
50
41
37
30
25
20
16
15
12.5
10
8.3
7.5
60Hz
600
500
360
300
240
200
180
144
120
100
90
72
60
50
45
36
30
24
20
18
15
12
10
9
5RK60GN-AFM
5RK60GN-EFM
5RK60GN-CFM
5RK60GN-HFM
5RK60GN-SFM
5RK60GN-S3FM
5GN□K
50Hz
1.10
1.40
1.90
2.30
2.90
3.40
3.57
4.80
5.70
6.80
7.03
8.60
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
11.2
14.2
19.3
23.4
29.6
34.7
36.4
48.9
58.1
69.3
71.7
87.7
100
100
100
100
100
100
100
100
100
100
100
100
60Hz
0.92
1.10
1.50
1.80
2.30
2.80
2.99
3.80
4.60
5.50
5.70
6.90
8.30
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
9.38
11.2
15.3
18.3
23.4
28.5
30.5
38.7
46.9
56.1
58.2
70.4
84.7
100
100
100
100
100
100
100
100
100
100
100
■ To Allow The Hoisting Of The Load Allow Axial Load
Motor (Round shaft) →P215
Gearhead→P215■ Permissible Load Inertia J For Gearhead
P215
■ Starting And Brake Characteristics (Reference Values)
● Single-phase Motor
● Three-phase Motor
■ Dimensions (Unit mm)
Mounting screws are included with gearhead.
● Lead Wiring Type
Weight：Motor：3.55kg Gearhead： 1.35kg
● Enter the gear ratio in the box (□) within the model nameMotor Model
Gearhead Model
Gear Ratio
L1
5RK60GN-AFM
5RK60GN-EFM
5RK60GN-CFM
5RK60GN-HFM
5RK60GN-SFM
5RK60GN-S3FM
5GN□K
3~200
60
● Gear ratio 3~18, short case is possible (L1=42)● Key·Keyway (Accessory Of Gearhead)
● Shaft Section 0f Round Shaft TypeExcluding weight and the shaft section motor shape are the same as those of the pinion shaft type.
● Decimal GearheadCan be connected to GN pinion shaft type
5GN10XK
Weight ：0.6kg
■ Formal Dimension Of Capacitor
● Note: Conventional capacitor is a lead wire type. Inserted 187# is optionalModel
Capacitor Model
L
W
H
Pinion Shaft
Round Shaft
5RK60GN-AFM
5RK60A-AFM
ZD250CFAUL
47
27
37
5RK60GN-EFM
5RK60A-EFM
ZD150CFAUL
47
20
31
5RK60GN-CFM
5RK60A-CFM
ZD45BFAUL
47
19
31
● Enter the code that represents the terminal box type (T) in the box (□) within the model name
■ Wiring Diagram
● The direction of motor rotation is as viewed from the shaft end of motor. CW represents the clockwise direction, while CCW represents the counterclockwise direction.
● Name indicated in the list is pinion shaft type, also valid for the equivalent round shaft type.
Single-phase Motor 5RK60GN-AFM、5RK60GN-EFM、5RK60GN-CFM、5RK60GN-HFM Sw1 operates both motor and electromagnetic brake action. (Switched simultaneously)
The motor will rotate when SW1 is switched simultaneously to ON.
When SW1 is switched simultaneously to OFF, the motor stops immediately with the electromagnetic brake and holds the load.
If you wish to release the brake while the motor is stopped, set the SW1 to off and connection point at the side of black lead to ON.
Direction of Rotation.
To rotate the motor in a clockwise (CW) direction, turn SW2 to CW.
To rotate the motor in a counterclockwise (CCW) direction, turn SW2 to CCW.
Switch
No.
Capacitor of Switch Connection Point
Note
Single-Phase 100V,
110/120V Input
Single-Phase 220V,
230V Input
SW1
AC 125V 3A
minimum
(Inductive Load)
AC 250V 1.5A
minimum
(Inductive Load)
Switched Simultaneously
SW2
-
Three-phase Motor
5RK60GN-SFM(S3FM)
SW1 operates both motor and electromagnetic brake action. (Switched Simultaneously)
The motor will rotate when SW1 is switched simultaneously to ON.
When SW1 is switched simultaneously to OFF, the motor stops immediately with the electromagnetic brake and holds the load.
If you wish to release the brake while the motor is stopped, set the SW1 to off and connection point at the side of black lead to ON.
Direction of Rotation.
To change the rotation direction, change any two connections between R, S and T.
Switch
No.
Capacitor of Switch Connection Point
Note
SW1
AC 250V 1.5A minimum
(Inductive Load)
Switched
Simultaneously
Notes:
● R0C0 indicate surge suppressor circuit. ［R0=5~200Ω, C0=0.1~0.2μF, 200WV (400WV) ] EPCR1201-2 is available as an optional surge suppressor.
■ 60W □ 90mm
■ Specs / Motor
● This type of motor does not contain a built-in simple brake mechanism.
Model · Type
Lead Wire Type
Rating
Output power
W
Voltage
V
Frequency
Hz
Current
A
Starting Torque
mN.m
Rated Torque
mN.m
Rated Speed
r/min
Capacitor
μF
Pinion Shaft
5RK60GU-AFM
30min
60
1ph 100
50
1.26
470
470
1250
25.0
60
1.70
380
1550
5RK60GU-EFM
30min
60
1ph 110
60
1.05
330
380
1550
15.0
1ph 120
0.85
380
5RK60GU-CFM
30min
60
1ph 220
50
0.55
420
470
1250
4.50
1ph 230
0.60
460
5RK60GU-HFM
30min
60
1ph 220
60
0.55
420
380
1550
4.50
1ph 230
0.60
460
5RK60GU-SFM
30min
60
3ph 220
50
0.45
1000
470
1250
-
60
0.40
800
380
1550
5RK60GU-S3FM
30min
60
3ph 380
50
0.26
1000
470
1250
-
60
0.23
800
380
1550
● When the motor is approved under various safety standards, the model name on the nameplate is the approved model name.
●： Contains a built-in thermal protector(automatic return). If a motor overheats for any reason, the thermal protector is opened and the motor stops.
● When the motor temperature drops, the thermal protector closes and the motor restarts. Be sure to turn the motor off before inspecting.
● Note: "-A" it means the voltage 110V, the assembly capacitor vaule it is according the labe.■ Type
● Motor
Type
Model
Pinion Shaft
Lead
Wire
Type
5RK60GU-AFM
5RK60GU-EFM
5RK60GU-CFM
5RK60GU-HFM
5RK60GU-SFM
5RK60GU-S3FM
● Parallel Shaft Gearhead (Sold Separately)
● Enter the gear ratio in the box (□) within the model nameGearhead Type
Gearhead Model
Gear Ratio
Long Life ● Low
Noise
5GU□KB
3、3.6、5、6、7.5、9、10、 12.5、15、18、20、25、30、 36、40、50、60、75、90、 100、120、150、180、200
5GU10XK（Decimal Gearhead ）
■ Gear Motor-Torque Table
● Gearhead and mid-gearbox can be sold separately. Enter the code that represents the terminal box type (T) in the box (□) within the model name.
● Enter the gear ratio in the box (□) within the model name.
● The colored background in dicates the same rotating direction of the motor while the rotating direction of others are opposite.
● The speed is calculated by dividing the motor's synchronous speed (50Hz：1500r/min、60Hz：1800r/min) by the gear ratio. The actual speed is 2%~20% less than the displayed
value, depending on the size of the load.
● To reduce the speed beyond the gear ratio in the table, attach a decimal gearhead (gear ratio:10) between the gearhead and motor. In that case, the permissible torque is 20N·m.■ Allowance Torque Unit： Upside（N.m）/ Belowside（kgf.cm）
Type
Motor/Gearhead
Gear Ratio
3
3.6
5
6
7.5
9
10
12.5
15
18
20
25
30
36
40
50
60
75
90
100
120
150
180
200
Speed r/min
50Hz
500
417
300
250
200
166
150
120
100
83
75
60
50
41
37
30
25
20
16
15
12.5
10
8.3
7.5
60Hz
600
500
360
300
240
200
180
144
120
100
90
72
60
50
45
36
30
24
20
18
15
12
10
9
5RK60GU-AFM
5RK60GU-EFM
5RK60GU-CFM
5RK60GU-HFM
5RK60GU-SFM
5RK60GU-S3FM
5GU□KB 5GU□K
50Hz
1.10
1.40
1.90
2.30
2.90
3.40
3.61
4.80
5.70
6.80
7.12
8.60
10.0
10.3
11.6
12.4
15.5
18.6
20.0
20.0
20.0
20.0
20.0
20.0
11.2
14.2
19.3
23.4
29.6
34.7
36.8
48.9
58.1
69.3
72.6
87.7
100
105
118
126
158
189
200
200
200
200
200
200
60Hz
0.92
1.10
1.50
1.80
2.30
2.80
3.01
3.80
4.60
5.50
5.73
6.90
8.30
8.30
9.70
10.0
12.5
15.0
18.8
20.0
20.0
20.0
20.0
20.0
9.38
11.2
15.3
18.3
23.4
28.5
30.7
38.7
46.9
56.1
58.4
70.1
84.7
84.6
98.9
102
127
153
192
200
200
200
200
200
■ To Allow The Hoisting Of The Load Allow Axial Load
Motor (Round shaft) →P215
Gearhead→P215■ Permissible Load Inertia J For Gearhead
P215
■ Starting And Brake Characteristics (Reference Values)
● Single-phase Motor
● Three-phase Motor
■ Dimensions (Unit mm)
Mounting screws are included with gearhead.
● Lead Wiring Type
Weight：Motor：3.55kg Gearhead： 1.5kg
● Enter the gear ratio in the box (□) within the model nameMotor Model
Gearhead Model
Gear Ratio
L1
5RK60GU-AFM
5RK60GU-EFM
5RK60GU-CFM
5RK60GU-HFM
5RK60GU-SFM
5RK60GU-S3FM
5GU□KB
3~200
65.5
● Flange Mounting Reducer
Can be mounted on GU type gear shaft
5GU□K
Weight:1.5kg
● Key·Keyway (Accessory Of Gearhead)
● Shaft Section 0f Round Shaft TypeExcluding weight and the shaft section motor shape are the same as those of the pinion shaft type.
● Decimal GearheadCan be connected to GN pinion shaft type
5GU10XK
Weight ：0.65kg
■ Formal Dimension Of Capacitor
● Note: Conventional capacitor is a lead wire type. Inserted 187# is optionalModel
Capacitor Model
L
W
H
Pinion Shaft
5RK60GU-AFM
ZD250CFAUL
47
27
37
5RK60GU-EFM
ZD150CFAUL
47
20
31
5RK60GU-CFM
ZD45BFAUL
47
19
31
● Enter the code that represents the terminal box type (T) in the box (□) within the model name
■ Wiring Diagram
● The direction of motor rotation is as viewed from the shaft end of motor. CW represents the clockwise direction, while CCW represents the counterclockwise direction.
● Name indicated in the list is pinion shaft type, also valid for the equivalent round shaft type.
Single-phase Motor 5RK60GU-AFM、5RK60GU-EFM、5RK60GU-CFM、5RK60GU-HFM Sw1 operates both motor and electromagnetic brake action. (Switched simultaneously)
The motor will rotate when SW1 is switched simultaneously to ON.
When SW1 is switched simultaneously to OFF, the motor stops immediately with the electromagnetic brake and holds the load.
If you wish to release the brake while the motor is stopped, set the SW1 to off and connection point at the side of black lead to ON.
Direction of Rotation.
To rotate the motor in a clockwise (CW) direction, turn SW2 to CW.
To rotate the motor in a counterclockwise (CCW) direction, turn SW2 to CCW.
Switch
No.
Capacitor of Switch Connection Point
Note
Single-Phase 100V,
110/120V Input
Single-Phase 220V,
230V Input
SW1
AC 125V 3A
minimum
(Inductive Load)
AC 250V 1.5A
minimum
(Inductive Load)
Switched Simultaneously
SW2
-
Three-phase Motor
5RK60GU-SFM(S3FM)
SW1 operates both motor and electromagnetic brake action. (Switched Simultaneously)
The motor will rotate when SW1 is switched simultaneously to ON.
When SW1 is switched simultaneously to OFF, the motor stops immediately with the electromagnetic brake and holds the load.
If you wish to release the brake while the motor is stopped, set the SW1 to off and connection point at the side of black lead to ON.
Direction of Rotation.
To change the rotation direction, change any two connections between R, S and T.
Switch
No.
Capacitor of Switch Connection Point
Note
SW1
AC 250V 1.5A minimum
(Inductive Load)
Switched
Simultaneously
Notes:
● R0C0 indicate surge suppressor circuit. ［R0=5~200Ω, C0=0.1~0.2μF, 200WV (400WV) ] EPCR1201-2 is available as an optional surge suppressor.
RELATED PRODUCTS
MESSAGES
If you have any questions, you can leave us a message. We have professionals to reply to you. Please fill in the correct contact information!
Contact
Ningbo Zhongda Leader Intelligent Transmission Co., Ltd.
Add.: No. 185 Xinxing 1st Road, Cixi High-tech Industrial
Development Zone, Ningbo
Tel: +86-574-63537171
Fax: +86-574-63534879
WhatsApp: +86-19136773454
E-mail: trade20@zd-motor.comFollow us on social:
Copyright © Ningbo Zhongda Leader Intelligent Transmission Co., Ltd. All Right Reserved. Powered by www.300.cn SEO Business license
-
