We look forward to providing you with professional services - Zhongda Leader
-
-
-
RV Cycloidal Pin Wheel Reducer
PRODUCTS
Detail
■ Z90DPN24400-30S-BM/82PN33.92
■ Motor Basic Parameter Table
Type Z90DP24400-30S-BM Gearbox direction Same as motor Rated voltage 24VDC Rated power 200W Bearing type Ball bearing Rated current 24A±10% Gearbox structure Integrated Rated speed 3200rpm±10% Efficiency 81% Rated torque 1.27N.m Gearbox rated torque 35N.m Noload current ≤3.5A Noload speed 3600rpm±10% Gearbox max torque 1.5x rated Work duty S2(10min) Insulation resistance >20MΩ Ambient temperature 10℃~+40℃ Brush life 2000h Noise <60dB(L=100cm) Electrical strength 660V/S Wire diagram 
Insulation class B Protection grade IP20 Gearbox spec 82PN33.92K Reduction stage 2 ■ Technical Requirement
· Motor basic parameters are as nameplate in drawing shows;
· The red lead is connected to the positive and the black lead is connected to the negative. Seen from the brake installation end, the drive wheel turns clockwise. When the lead position is reversed, the drive wheel turns in the opposite direction;
· The working life of the brush is 2000 hours;
· Lead wire lengt: 1350mm±20, model: Ul1015, spec: AWG14、the nameplate is sticky, as shown in the figure, 20mm from the front cover;
· and motor should be firmly tightened and threaded glue should be appied before tightening;
· Screws of gearbox and motor should be firmly tightened and threaded glue should be appied before tightening;
· 64-bit encoder purchased, installde by ZD itself;
· Use neutral nameplates according to customer requirements.
■ 64-bit Encoder Wiring DefinitionNo. Color Function 1 Red VCC+5V 2 Black GND 3 Blue A Phase 4 Yellow B Phase ■ Z90DPN24200-32S-BM/82PN33.92
■ Motor Basic Parameter Table
Type Z90DP24200-32S-BM
Gearbox directionSame as motor Rated voltage 24V DC Rated power 200W Bearing type Ball bearing Rated current 13A±10% Gearbox structure Integrated Rated speed 3200rpm±10% Efficiency 81% Rated torque 0.597N.m
Gearbox rated torque16.4N.m Noload current ≤3.5A Noload speed 3600rpm±10% Gearbox maxtorque 1.5x rated Work duty S2(10min) Insulation resistance >20MΩ Ambient temperature 10℃~+40℃ Brush life 2000h Noise <60dB(L=100cm) Electrical strength 660V/S Wire diagram Insulation class B Protection grade IP20 Gearbox spec 82PN33.92K Reduction stage 2 ■ Motor Basic Parameter Table
1 Encoder ZDDC-BMQ-005 64-bit encoder 2 Machine Z90DPN24200-32S/82ZPN33.92K-OWZ-00100 ■ Technical Requirement
· Motor basic parameters are as nameplate in drawing shows;
· The red lead is connected to the positive and the black lead is connected to the negative. Seen from the brake installation end, the drive wheel turns clockwise. When the lead position is reversed, the drive wheel turns in the opposite direction;
· The working life of the brush is 2000 hours;
· Lead wire lengt: 1350mm±20, model: Ul1015, spec: AWG14, nameplate position is as the picture shows, 20mm from the front cover;
· Screws of gearbox and motor should be firmly tightened and threaded glue should be appied before tightening;
· Insert dowel pin of motor and gearbox seperately after testing motor and machine;
· 64-bit encoder purchased, installde by ZD itself.■ 64-bit Encoder Wiring DefinitionNo. Color Function 1 Red VCC+5V 2 Black GND 3 Blue A Phase 4 Yellow B Phase RELATED PRODUCTS
MESSAGES
If you have any questions, you can leave us a message. We have professionals to reply to you. Please fill in the correct contact information!
Contact
Ningbo Zhongda Leader Intelligent Transmission Co., Ltd.
Add.: No. 185 Xinxing 1st Road, Cixi High-tech Industrial
Development Zone, Ningbo
Tel: +86-574-63537171
Fax: +86-574-63534879
WhatsApp: +86-19136773454
E-mail: trade20@zd-motor.comFollow us on social:
Copyright © Ningbo Zhongda Leader Intelligent Transmission Co., Ltd. All Right Reserved. Powered by www.300.cn SEO Business license
-
